Fixed motor mount
A: screw spacing, from one hole to the opposite one. 32 mm is common on indoor models. It is given in the motor's data sheet, or can be measured.
AL / AH: motor with two spacings (16 × 19 mm for example), across the width and the height of the plan. The ring becomes an ellipse.
B: 2 mm for M2 screws, 3 mm for M3 screws.
C: wider than the hole, it spreads the clamping load. At least 1 mm of material around the hole.
D: longer means more area to glue the mount onto the model.
DL / DH: arms of different lengths across the width and the height of the plan, for example longer in the plane of the fuselage for more gluing area, shorter across it if the nose is narrow.
E: wider arms are stiffer, but heavier.
F: the ring links the four holes and stiffens the cross between the screws. Wider means stiffer, but heavier.
G: larger fillets limit cracks where the arms meet.
H: 2 mm for 3D printing (PLA), 1.5 mm for CNC cutting in carbon.